-40%
Schiller SpiroScout PC Based Ultrasound Spirometry System 1.500000
$ 949.87
- Description
- Size Guide
Description
Schiller SpiroScout PC Based Ultrasound Spirometry System 1.500000The SpiroScout SP incorporates the latest ultrasound technology and can be used in combination with SCHILLER ECG devices.
This new concept offers many benefits, as it simplifies the handling of the measurements and the data management for both ECG and Spirometry recordings. There are no moving parts, no filters to change, no screens to catch sputum and no disposables to calibrate.
The ultrasonic flow measurement is independent of gas composition, pressure and humidity. Therefore errors connected with these variables are eliminated. In combination with the disposable ScoutTube sensors you have a safe, efficient solution with full contamination control.
FEATURES
Ultrasonic flow sensor to measure the flow of air into and out of the patient’s lungs
Works in combination with CARDIOVIT AT-102 (only with SCM), CARDIOVIT AT-102 plus, CARDIOVIT AT-10 plus, CARDIOVIT MS-2010 and CARDIOVIT MS-2015
Sensor is not influenced by humidity, barometric pressure and contamination
Extremely high accuracy for low flows
No volume calibration and no warm-up time necessary
No cleaning and maintenance needed
Hygienic ScoutTube sensors for single patient use
What does it come with?
SpiroScout Base
SpiroScout Sensor
Spiral Cable Sensor to Base Station
USB Cable
10 Nose Clip Standard
50 ScoutTube Mouthpieces
1 year manufacturers warranty
TECHNICAL DATA
Flow-Measurement
Principle Ultrasound transit time
Range 0 to ± 20 l/s
Accuracy ± 2%
Resolution 0.001 l/s
Volume-Measurement
Measurement Principle Digital Integration
Range Not limited
Accuracy ± 2%
Resolution 1 mL
Dimensions
Device 18 cm x 9 cm x 9 cm (W x H x D)
Weight 1000 g (ScoutSensor 185 g, base station 730 g, cable 85 g)
Breathing Insert Spiroscout 0.002 kPa/l/s
Breathing resistance 18 cm³ (pediatric inlet available) Dead space, complete
Material Polyethylene
Computer Interface
Data transfer to PC USB 2.0
USB connection Connector A - connector B, double shielded, 2x AWG24
Power Supply
StandardPowered via USB 2.0 - Voltage 4.5 to 5.25 V DC - Power Supply: 500 mA
Option External AC Adapter
Standards
Quality Management ISO 13485
FDA 510(k) market clearance
MDD 93/42/ECC CE Marked
Electrical safety EN 60601-1 (Third Edition)
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."